Malaysia 10 Cents Coin With Partial Brockage Errors


Brockage Error coin can only hapened when one of the planchets will always be a struck coin that has not properly ejected from the press.This struck coin will find its way back between the dies and either the obverse or the reverse will be struck into a blank planchet that is subsequently fed into the collar.The image of the struck coin will be impressed into the blank planchet,the result of which will be a second struck coin with the proper image on one side and an incuse,inverted image of the previously struck coin on the other.This incuse,inverted image is a brockage.

This was resulted by a already struck coin.The milled edge image was formed by a proper struck coin.
 If they is no milled edge image,then we shall call it a Partial Indent Strike Error Coin.

 The deformed on the obverse was caused by the force of impact of a Partial Brockage Strike Errors on the reverse.


  1. sir,
    about this posting -

    is there somewhere online where i could see the items that will be sold? thank you.

  2. Hi remgold,
    If you are in KL, you may pick a copy from me FREE at my Dickson Niew Collection Corner or visit their office in Singapore to pick up a copy,please visit :