FULL BROCKAGE ON FORGERY COPPER DOLLAR (Part 1)

Malaysia Forgery Copper Dollar Coin With Full Brockage Striking Errors.

Rarity:RRRR

Mr.Mahadevan's Collection.
Ways of explaining a Brockage Striking Errors.

A brockage is formed when a coin is not ejected from the press and remains in place while another planchet is struck. The result is that the first coin acts as a die for the second coin and makes an incuse impression of the exposed face.  OR

Full Brockage Errors.$/RM 1.(1989-1996). Reverse.
A brockage is an early form of mint error which results from the use of a previously-struck coin as a die. We suppose that this normally resulted from a freshly-struck piece adhering to the punch die as a result of surface tension, or simply the adhesiveness of heated metal; a virgin flan was then inserted on the anvil die and struck with the punch, so that the obverse previously produced by that anvil die appears in incuse as the reverse of the new coin. Eventually the first coin drops from the die and coining proceeds as usual; the flawed pieces escape detection and find their way into circulation. 

Full Brockage Errors.$/RM 1.(1989-1996). Obverse.
Full brockage Errors are rare and the most desirable form of the error.

RSP:499.00

7 comments:

  1. Hi Dickson,
    Wow, what a beauty even when it is a forgery.
    Honestly, never found a full brockage so far.
    By the way, really love the one that you are using as your profile pic.
    Congratz and thanks a lot for sharing, Dickson :)

    ReplyDelete
  2. Hi Mr Dickson,
    Depankanta ada kemuskilan tentang syiling yg dipamirkan ini diharap mendapat sedikit penjelasan dari Mr Dickson:
    Kedudukan die dan planchet pada syiling Malaysia ialah die bawah(anvil die)menempa bahagian muka syiling(obv) dan die atas(hammer(die)menempa bahagian belakang syiling(rev).

    Untuk Syiling diatas bahagian keris(obv)ditempa oleh die bawah dan terus berada dalam kedudukan muka kebawah.Bila planchet baru masuk ke chamber,die atas menempa planchet itu dan imej die atas iaitu angka dan bunga raya terbentuk pada planchet baru itu..sementara pada bahagian bawah planchet baru itu tentu juga ditempa imej yg sama oleh syiling asal yg juga ada imej angka dan bunga raya(akibat tempaan pertama)..

    Agak menghairankan bagaimana boleh terjadi syiling foto ke2(tengah)sedangkan bahagian muka syiling asal yg "menjadi die"berada kebawah?...

    Harap mendapat penjelasan dari Mr Dickson tentang perkara ini dan sekiranya depankanta silap dalam fahaman ini harap dimaafkan..

    Brockage errors jarang didapat dilihat pada syiling Malaysia,Tahniah pada Mr Maha dan Terima kasih banyak2 Mr Dickson untuk perkongsian yg sangat menarik ini..

    ReplyDelete
  3. Hi Whycollect,
    Major mint errors like Full brockage Errors on a forgery coin is equally rare,scarce and interesting.
    Love on the first sight!

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Hi Mr Dickson,
    Depankanta ada kemuskilan tentang syiling yg dipamirkan ini diharap mendapat sedikit penjelasan dari Mr Dickson:
    Kedudukan die dan planchet pada syiling Malaysia ialah die bawah(anvil die)menempa bahagian muka syiling(obv) dan die atas(hammer(die)menempa bahagian belakang syiling(rev)."
    Kamu betul sampai sini!

    Syiling yang sudah ditempa terlekat di die hammer (die atas).
    Bila planchet baru masuk (akhir jadi syiling error yang saya paparkan di atas),ia akan ditempa oleh die hammer dengan syiling yang sudah ditempa terdahulu lalu terlekat di die hammer (die atas).Maka planchet baru masuk ini akan ditempa oleh image Keris dan sarung kris yang "incused" di atas bahagian reverse syiling ini!

    Cuba lihat Post Seterusnya!

    ReplyDelete
  6. Terima kasih atas penerangan Mr Dickson,
    Mengikut keterangan itu syiling tersebut ditempa oleh syiling yg melekat pada die atas,apa pula beza dgn die caps dan capped die strike?..Harap Mr Dickson boleh terangkan berbezaan ini

    Sangat menarik penemuan syiling ini kerana ianya terjadi pada syiling palsu..

    Tahniah dan terima kasih banyak Mr Dickson dan Mr Mahadevan.

    ReplyDelete
  7. Hi Depankanta,
    Kamu boleh rujuk kepada post saya di : http://dniewcollectors.blogspot.com/2011/05/malaysia-coin-striking-errorsdie-cap_22.html.

    Syiling yang terlekat di hammer die (die atas) dan ditempa bertubu-tubi,ia akan menjadi rupa seperti cap bottle,ini dinamakan Die Cap Errors.

    Planchet yang ditempa bertubi-tubi oleh hammer die yang sudah terleket dengan Die Cap Errors sehingga planchet yang berada di bawah ini juga menjadi shape seperti penutup bottle,ia dinamakan Capped Die Errors.

    Jika perlu kerterangan yang lebih lanjut,sila hubungi saya!

    ReplyDelete